Samsung SCH-A950
Does anyone know how to edit the browser settings?
Hi, has anyone figured out how to edit the mobile browser settings yet so I can enter my own proxy? I've looked all over the web for this information but to no avail. It would be much appreciated, thanks!
...
This is what I found for the default programming of it. Hope it does what you need
WEB IP PROGRAMMING
Step 01: Power phone On, From the main screen, press Menu. Scroll to GET IT NOW. Press [#].
Step 02: Enter Lock Code displays, press
the 4 Digit Unlock Code (Normally: Last 4 Digits of Mobile)
Step 03: Scroll to Primary IP, press OK.
Step 04: Scroll to HTTP Proxy Port, Press OK.
Step 05: Press 8080
Step 06: Press OK.
Step 07: Scroll to Proxy Address, Press OK. Enter In the 12 Digit IP Address 066.174.077.060. Press OK.
Step 08: Press End
PROGRAMMING COMPLETE
WEB IP PROGRAMMING
Step 01: Power phone On, From the main screen, press Menu. Scroll to GET IT NOW. Press [#].
Step 02: Enter Lock Code displays, press
the 4 Digit Unlock Code (Normally: Last 4 Digits of Mobile)
Step 03: Scroll to Primary IP, press OK.
Step 04: Scroll to HTTP Proxy Port, Press OK.
Step 05: Press 8080
Step 06: Press OK.
Step 07: Scroll to Proxy Address, Press OK. Enter In the 12 Digit IP Address 066.174.077.060. Press OK.
Step 08: Press End
PROGRAMMING COMPLETE
...
Hello, I tried what you said and nothing happened. Pressed # at the get it now tab and nothing. ☹️
...
That takes me to a settings menu however there is nothing in there about the mobile web ☹️
...
sorry, not sure what happend there but lets try this:
WEB IP PROGRAMMING
Step 01: With the flip OPEN, press MENU [OK]+ 0 to access Programing Menu
Step 02: Service Code ?????? displays, enter 000000 (Service Programming Code - Default)
Step 03: Select WAP Setting.
Step 04: Select Proxy Address Setting.
Select Primary Address
or
Select Secondary Address.
Step 05: Enter the 12 digit Proxy Addresss EG. gw.vzwwap.com
Step 06: Press OK, press CLR
Step 07: Select Proxy Port Setting.
Select Primary Port. 8080
Select Primary LXL Port. 0443
Select Secondary Port. 8080
Select Secondary LXL Port. 0443
Step 10: Press END
PROGRAMMING COMPLETE
These are defauly seetings.
hope...
(continues)
WEB IP PROGRAMMING
Step 01: With the flip OPEN, press MENU [OK]+ 0 to access Programing Menu
Step 02: Service Code ?????? displays, enter 000000 (Service Programming Code - Default)
Step 03: Select WAP Setting.
Step 04: Select Proxy Address Setting.
Select Primary Address
or
Select Secondary Address.
Step 05: Enter the 12 digit Proxy Addresss EG. gw.vzwwap.com
Step 06: Press OK, press CLR
Step 07: Select Proxy Port Setting.
Select Primary Port. 8080
Select Primary LXL Port. 0443
Select Secondary Port. 8080
Select Secondary LXL Port. 0443
Step 10: Press END
PROGRAMMING COMPLETE
These are defauly seetings.
hope...
(continues)
...
I tried that and i tried pressing #,*,0 on all the tabs and none of them get me any menus that give browser settings. Prehaps the only way to do this is by editing a file with a data cable, none of which I have now. If anyone can figure out a way to do this with just a code in the phone still that would be great 🙂
...
